System approach

40 mm wide to be as strong as possible and easy to feel the difference compared to the normal 25 mm webbing and buckles.
Elastic to move with your body.
Used to connect two carrier pouches, when used as Plate carriers or to connect the
carrier pouch with the Strap-on.

40 mm wide to be as strong as possible and easy to feel the difference compared to the normal 25 mm webbing and buckles.
Together with the elastic T-bar set it is the connection between two carrier pouches when used as a simple plate carrier.
Square Ring, in the end, lets you know which band you pull, even if you do not see it.
Attach it to the bands.
Elastic holds the excess band in place.
The 40 mm long T-bar is included in all Strap-ons with 17-00xxx article number.

Ergonomically shaped groin protection that
can be connected with an elastic Velcro strap between your legs.
Cut to not restrict your movements.
Includes cover and ballistic NIJ IIIA & RPS2 panels.
One size.

Small ballistic sleeves that are optimized for movement.
Elastic band with fabric cover around your arm. Attaches to the yoke with straps and Velcro. This attachment is very flexible and does not restrict you when you lift your arms.
Place for patches on the Velcro.
Includes cover and ballistic NIJ IIIA & RPS2 panels. One size.

A ballistic yoke with collar that protects the shoulders and neck.
Can easily be used with the plate carrier. Put on the yoke and open band in the front. Put on the plate carrier on top of the yoke and close the band.
Thread the strap for neck protection in the plate carrier and attach the throat protection straps on the collar. Padded for increased comfort. Includes cover and ballistic NIJ IIIA & RPS2 panels. One size.

A ballistic back that can be attached to the plate carrier Strap-on.
Can easily be used with the plate carrier. Put on I-bars on the Strap-on and attach the shoulders on the ballistic back to the Strap-on.
Cummerbund to take some weight of the shoulders.
MOLLE webbings on most of the surface. Velcro patches for name and unit patches. Includes cover and ballistic NIJ IIIA & RPS2 panels.

Padded yoke straps that can be used to transform the carrier pouches to a plate carrier systems together with a T-bar set. Can also be used be as a padding on a shoulder strap.
MOLLE band on the top.

A NIJ II or IIIA vest that accepts NIJ IV hard ballistic plates.
It is easy to adjust in the length with the shoulder straps and in width with the elastic waist bands.
Semi elastic outer and air mesh inner to fit comfortably.

For the Strap-on plate carrier.
Protection level NIJ IIIA.
One size.

For the Strap-on plate carrier.
Protection level NIJ IIIA.

Side panels for plate carrier Strap-on and Squeeze. NIJ IIIA

For the Combat & Comfort belts.
Protection level NIJ IIIA.

Ballistic panels for Squeeze plate carrier. Protection level NIJ IIIA.

Cut to make it easier to shoot. Certified to NIJ IV, no panels required.

A tactical ballistic vest with very good protection.
This vest was developed together with the Stockholm SWAT police unit.
It is designed to give maximum protection and still be good to operate in. The vest has large sleeves to give optimum protection in all tactical situations. Inside cummerbund to take some weight of the shoulders.
MOLLE webbings on the front and back.
Velcro on the front and back for name and unit patches.
The vest is designed with front, back, yoke, sleeves and groin protection.
It can be worn in the following configurations:

1. Front and back with shoulder pads for maximum mobility and agility
2. Front and back with the yoke for added protection combined with high comfort and mobility
3. Front and back with the yoke and groin protection for enhanced security combined with high comfort and good movement
4. Front and back with the yoke, sleeves and groin protection for maximum protection combined with good comfort and sufficient mobility

Includes cover and ballistic NIJ IIIA/RPS2 panels.

A comfortable way of carrying the ballistic shield so that you can focus on the mission. Attaches to the ballistic vest or modular vest.
Can hold an up to 42 mm thick plate. Adjustable length.
How to use it:
Attach the shield carrier to the back of your vest.
Put the shield in the hook.
Balance the shield with your weaker hand. Hold your gun with the other.
Let go of the shield if needed and it falls down, leaving you free.

SYSTEM APPROACH

40 mm wide to be as strong as possible and easy to feel the difference compared to the normal 25 mm webbing and buckles.
Elastic to move with your body.
Used to connect two carrier pouches, when used as Plate carriers or to connect the
carrier pouch with the Strap-on.

40 mm wide to be as strong as possible and easy to feel the difference compared to the normal 25 mm webbing and buckles.
Together with the elastic T-bar set it is the connection between two carrier pouches when used as a simple plate carrier.
Square Ring, in the end, lets you know which band you pull, even if you do not see it.
Attach it to the bands.
Elastic holds the excess band in place.
The 40 mm long T-bar is included in all Strap-ons with 17-00xxx article number.

Ergonomically shaped groin protection that
can be connected with an elastic Velcro strap between your legs.
Cut to not restrict your movements.
Includes cover and ballistic NIJ IIIA & RPS2 panels.
One size.

Small ballistic sleeves that are optimized for movement.
Elastic band with fabric cover around your arm. Attaches to the yoke with straps and Velcro. This attachment is very flexible and does not restrict you when you lift your arms.
Place for patches on the Velcro.
Includes cover and ballistic NIJ IIIA & RPS2 panels. One size.

A ballistic yoke with collar that protects the shoulders and neck.
Can easily be used with the plate carrier. Put on the yoke and open band in the front. Put on the plate carrier on top of the yoke and close the band.
Thread the strap for neck protection in the plate carrier and attach the throat protection straps on the collar. Padded for increased comfort. Includes cover and ballistic NIJ IIIA & RPS2 panels. One size.

A ballistic back that can be attached to the plate carrier Strap-on.
Can easily be used with the plate carrier. Put on I-bars on the Strap-on and attach the shoulders on the ballistic back to the Strap-on.
Cummerbund to take some weight of the shoulders.
MOLLE webbings on most of the surface. Velcro patches for name and unit patches. Includes cover and ballistic NIJ IIIA & RPS2 panels.

Padded yoke straps that can be used to transform the carrier pouches to a plate carrier systems together with a T-bar set. Can also be used be as a padding on a shoulder strap.
MOLLE band on the top.

A NIJ II or IIIA vest that accepts NIJ IV hard ballistic plates.
It is easy to adjust in the length with the shoulder straps and in width with the elastic waist bands.
Semi elastic outer and air mesh inner to fit comfortably.

For the Strap-on plate carrier.
Protection level NIJ IIIA.
One size.

For the Strap-on plate carrier.
Protection level NIJ IIIA.

Side panels for plate carrier Strap-on and Squeeze. NIJ IIIA

For the Combat & Comfort belts.
Protection level NIJ IIIA.

Ballistic panels for Squeeze plate carrier. Protection level NIJ IIIA.

Cut to make it easier to shoot. Certified to NIJ IV, no panels required.

A tactical ballistic vest with very good protection.
This vest was developed together with the Stockholm SWAT police unit.
It is designed to give maximum protection and still be good to operate in. The vest has large sleeves to give optimum protection in all tactical situations. Inside cummerbund to take some weight of the shoulders.
MOLLE webbings on the front and back.
Velcro on the front and back for name and unit patches.
The vest is designed with front, back, yoke, sleeves and groin protection.
It can be worn in the following configurations:

1. Front and back with shoulder pads for maximum mobility and agility
2. Front and back with the yoke for added protection combined with high comfort and mobility
3. Front and back with the yoke and groin protection for enhanced security combined with high comfort and good movement
4. Front and back with the yoke, sleeves and groin protection for maximum protection combined with good comfort and sufficient mobility

Includes cover and ballistic NIJ IIIA/RPS2 panels.

A comfortable way of carrying the ballistic shield so that you can focus on the mission. Attaches to the ballistic vest or modular vest.
Can hold an up to 42 mm thick plate. Adjustable length.
How to use it:
Attach the shield carrier to the back of your vest.
Put the shield in the hook.
Balance the shield with your weaker hand. Hold your gun with the other.
Let go of the shield if needed and it falls down, leaving you free.