Squezze system
This plate carrier sits very comfortable and tight on your body.
It is easy to adjust in height and width, even when worn.
The plate carrier is used either with the side panel pouch set or the quick adjust set. Both options are attached with a zipper in the side of the plate carrier to be easy to open or close. Foam ridges on the inside for increased ventilation, comfort and lower trauma. Compartments for ballistic panels and ceramic plates on the front and back. The bottom of the plate carrier is were the ballistic panels and plates are inserted or removed. This is also were you attach the groin protection when needed.
MOLLE webbing on the front and back. One attachment point on each shoulder for a repair buckle to attach a backpack. Two attachment points under the MOLLE webbings on the chest for repair buckles to attach the chest panel. An elastic cord is placed around the edge of the front to hold hydration tubes or cables.
Removable padded yoke wraps with cable channel and elastic loops for antennas.
Your radio ear piece can be placed under a flap in the shoulder wrap when not in use. Velcro patches on the front and back for name and unit patches.
The Squeeze plate carrier can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set.
The option to select if you want ballistic protection in the side of your Squeeze plate carrier. In this set a ballistic panel (81-00933) can be carried in each pouch. On the outside of the pouches, MOLLE webbings are sewn so you can attach equipment pouches. The side panel set is attached in the back of the Squeeze plate carrier. It is very fast and easy to adjust, just pull the knob in the lower front and the panel pouch is pulled back, making it sit tight, but flexible around your body. In the back an elastic cord is placed to keep the system flexible.
The ventilated option for your Squeeze plate carrier.
It leaves your sides open, but allows you to attach pouches on the webbings in the sides.
The pouches can then be pushed forward when needed and back again,
One size fits all.
The chest panel can be attached on the front of the Squeeze plate carrier with two repair buckles and the side closures. It can also be carried as a chest rig if used with our harness and long T-bar set.
Its purpose is to allow you to have different configurations of pouches.
Then it is very easy and fast to switch, depending on your mission.
It also means that you can remove the plate carrier and go light, with just the chest panel as a chest rig.
This plate carrier sits very comfortable and tight on your body.
Adjust it to your size in the shoulders, put it on and pull the cords to make it sit tight. Tighten the webbing in the back.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Compartments for ballistic panels and ceramic plates on the front and sides.
MOLLE webbing on the yoke, front and sides.
Three adjustable pouches with elastic loop holder for different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
Adjustable elastic cords on the outside to keep the magazines tight.
Top front pocket for maps and other administration gear.
Small compartments for cleaning kits, light sticks etc. on the inside of the Strap-on. Padded yokes with cable channels and elastic loops for antennas. Your radio ear piece can be placed under a flap in the yoke when not in use.
Openings for radio wires in the front.
Elastic loops on the shoulders for hydration tube or radio wires.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
The Strap-on can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set.
The carrier pouch in the back is not included.
A small backpack or pouch for your ballistic plate.
Can hold one ballistic plate or one 2,5 liter hydration system.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Can be attached on the back of the “Strap-on” plate carrier.
MOLLE webbings on the outside so you can attach other pouches on it.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
Can be used as a plate carrier with two carrier pouches. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. Or even as a shoulder bag with the carry strap -11.
You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity.
The elastic T-bar set is not included in the product.
This plate carrier sits very comfortable and tight on your body.
Adjust it to your size in the shoulders, put it on and pull the cords to make it sit tight. Tighten the webbing in the back.
Compartments for ballistic panels and ceramic plates on the front and sides
Six MOLLE webbing slots on the front and four on the sides. Also MOLLE webbing on the yoke.
Three pouches with elastic loop holder for different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out. The Strap-on can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set. Neither the carrier pouch nor the 40mm elastic T-bar is included in Strap-on -14.
A small backpack or pouch for your ballistic plate.
Can hold one ballistic plate or one 2,5 liter hydration system.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Can be attached on the back of the “Strap-on” plate carrier or any vest. MOLLE webbings on the outside so you can attach other pouches on it.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
Can be used as a plate carrier with two carrier pouches. Just connect them with the shoulder straps -11 and the T-bars -10 in the side.
You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11
The elastic T-bar set is not included in the product.
SQUEZZE SYSTEM
This plate carrier sits very comfortable and tight on your body.
It is easy to adjust in height and width, even when worn.
The plate carrier is used either with the side panel pouch set or the quick adjust set. Both options are attached with a zipper in the side of the plate carrier to be easy to open or close. Foam ridges on the inside for increased ventilation, comfort and lower trauma. Compartments for ballistic panels and ceramic plates on the front and back. The bottom of the plate carrier is were the ballistic panels and plates are inserted or removed. This is also were you attach the groin protection when needed.
MOLLE webbing on the front and back. One attachment point on each shoulder for a repair buckle to attach a backpack. Two attachment points under the MOLLE webbings on the chest for repair buckles to attach the chest panel. An elastic cord is placed around the edge of the front to hold hydration tubes or cables.
Removable padded yoke wraps with cable channel and elastic loops for antennas.
Your radio ear piece can be placed under a flap in the shoulder wrap when not in use. Velcro patches on the front and back for name and unit patches.
The Squeeze plate carrier can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set.
The option to select if you want ballistic protection in the side of your Squeeze plate carrier. In this set a ballistic panel (81-00933) can be carried in each pouch. On the outside of the pouches, MOLLE webbings are sewn so you can attach equipment pouches. The side panel set is attached in the back of the Squeeze plate carrier. It is very fast and easy to adjust, just pull the knob in the lower front and the panel pouch is pulled back, making it sit tight, but flexible around your body. In the back an elastic cord is placed to keep the system flexible.
The ventilated option for your Squeeze plate carrier.
It leaves your sides open, but allows you to attach pouches on the webbings in the sides.
The pouches can then be pushed forward when needed and back again,
One size fits all.
The chest panel can be attached on the front of the Squeeze plate carrier with two repair buckles and the side closures. It can also be carried as a chest rig if used with our harness and long T-bar set.
Its purpose is to allow you to have different configurations of pouches.
Then it is very easy and fast to switch, depending on your mission.
It also means that you can remove the plate carrier and go light, with just the chest panel as a chest rig.
This plate carrier sits very comfortable and tight on your body.
Adjust it to your size in the shoulders, put it on and pull the cords to make it sit tight. Tighten the webbing in the back.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Compartments for ballistic panels and ceramic plates on the front and sides.
MOLLE webbing on the yoke, front and sides.
Three adjustable pouches with elastic loop holder for different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
Adjustable elastic cords on the outside to keep the magazines tight.
Top front pocket for maps and other administration gear.
Small compartments for cleaning kits, light sticks etc. on the inside of the Strap-on. Padded yokes with cable channels and elastic loops for antennas. Your radio ear piece can be placed under a flap in the yoke when not in use.
Openings for radio wires in the front.
Elastic loops on the shoulders for hydration tube or radio wires.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
The Strap-on can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set.
The carrier pouch in the back is not included.
A small backpack or pouch for your ballistic plate.
Can hold one ballistic plate or one 2,5 liter hydration system.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Can be attached on the back of the “Strap-on” plate carrier.
MOLLE webbings on the outside so you can attach other pouches on it.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
Can be used as a plate carrier with two carrier pouches. Just connect them with the shoulder straps -11 and the T-bars -10 in the side. Or even as a shoulder bag with the carry strap -11.
You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity.
The elastic T-bar set is not included in the product.
This plate carrier sits very comfortable and tight on your body.
Adjust it to your size in the shoulders, put it on and pull the cords to make it sit tight. Tighten the webbing in the back.
Compartments for ballistic panels and ceramic plates on the front and sides
Six MOLLE webbing slots on the front and four on the sides. Also MOLLE webbing on the yoke.
Three pouches with elastic loop holder for different 5,56 or 7,62 mm magazines or radios. Even your pistol with a lamp can be carried in them.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out. The Strap-on can be carried in a system with the ballistic yoke, small ballistic sleeve set and ballistic groin protection set to make a really good protective set. Neither the carrier pouch nor the 40mm elastic T-bar is included in Strap-on -14.
A small backpack or pouch for your ballistic plate.
Can hold one ballistic plate or one 2,5 liter hydration system.
Foam ridges on the inside for increased ventilation, comfort and lower trauma. Can be attached on the back of the “Strap-on” plate carrier or any vest. MOLLE webbings on the outside so you can attach other pouches on it.
Velcro patches on the front for name and unit patches.
The bottom of the plate carrier can be opened so the plates can be pulled out in an emergency.
Can be used as a plate carrier with two carrier pouches. Just connect them with the shoulder straps -11 and the T-bars -10 in the side.
You can also use this carrier as a backpack on your modular vest or on the outside of a backpack to increase the storage capacity. Or even as a shoulder bag with the carry strap -11
The elastic T-bar set is not included in the product.
